1. Manuals
  2. Brands
  3. Planet Manuals
  4. Security Camera
  5. ICA-H651
  6. User manual

Planet ICA-H651 User Manual

H.264 outdoor speed dome internet camera
Hide thumbs Also See for ICA-H651:
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 Outdoor Speed Dome

Internet Camera

ICA-H651
User's Manual
Version: 1.01
Date: October. 2009
1

Advertisement

Table of Contents
loading

Related Manuals for Planet ICA-H651

Summary of Contents for Planet ICA-H651

  • Page 1: Internet Camera

    H.264 Outdoor Speed Dome Internet Camera ICA-H651 User’s Manual Version: 1.01 Date: October. 2009...
  • Page 2 Copyright Copyright © 2009 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual for PLANET H.264 Outdoor Speed Dome Internet Camera Model: ICA-H651 Rev: 1.01 (October. 2009) Part No. EM-ICAH651...

  • Page 4: Table Of Contents

    2.3.1 Wall Mount..................... 10 2.3.2 Ceiling Mount ..................11 2.4 Initial Utility Installation ................... 12 2.5 Preparation....................... 14 2.5.1 Search and View by PLANET IPWizard II........14 Search......................14 View ........................15 2.5.2 Configure Network by PLANET IPWizard II........15 2.6 Using UPnP of Windows XP or Vista............
  • Page 5 3.6.1 Picture ....................47 3.6.2 PTZ Setting ................... 48 3.6.3 Preset Setting ..................49 3.6.4 Tour Setting ................... 50 3.7 System....................... 51 3.7.1 System ....................51 3.7.2 Date & Time................... 52 3.7.3 Maintenance..................53 3.8 Video........................55 3.8.1 Common ....................55 3.8.2 H264 Profile...................

  • Page 6: Introduction

    1. Introduction The PLANET ICA-H651, H.264 Outdoor Speed Dome Internet Camera, offers the next generation video compression – H.264. It is the most effective solution on the bandwidth limited networks, like Internet transmission. The ICA-H651 features a 230X zooming (23x optical zoom, 10x digital zoom), auto focus, and auto iris.

  • Page 7: Package Contents

    1.3 Package Contents User can find the following items in the package: Speed Dome Camera Unit x 1 Power Adapter x 1 Power Box Wall Mount Kit x 1 Power Box Electric Wire Kit x 1 Camera Bracket Screws Kit x 1 Waterproof Strip x 1 Terminal Block x 2 Video and Audio Cable x 3...

  • Page 8: Basic Setup

    2. Basic Setup This chapter provides details of installing and configuring the ICA-H651 2.1 System Requirements Network Interface 10/100MBase-TX Ethernet Monitoring System Recommended for Internet Explorer 6.0 or later System Hardware · CPU: Pentium 4, 3.0GHz or above · Memory Size : 512 MB (512 MB or above Recommended ) ·...

  • Page 9: Physical Description

    2.2 Physical Description 2.2.1 Terminal Connections AC 24V in MIC in DI / DO RS-485 Video Out Line out 12VDC RJ-45 LAN socket Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of the network automatically.

  • Page 10: Hardware Installation

    2.3 Hardware Installation 2.3.1 Wall Mount 1. Disassemble the Outdoor Flange and dome housing with wrench. Mount the dome housing as figure. 2. Mount the power box on a solid wall. Mount the wall bracket on the power box. 3. Fix the wall bracket to the outdoor flange with screws and wrench. Tighten the screws as figure.

  • Page 11: Ceiling Mount

    2.3.2 Ceiling Mount 1. Disassemble the Outdoor Flange and dome housing with wrench. Mount the dome housing as following. 2. Fix the ceiling bracket and connect it with outdoor flange with screws and wrench. Tighten the screws as following. 3. Connect all the cables as required. 4.

  • Page 12: Initial Utility Installation

    If the welcome screen does not appear, click “Start” at the taskbar. Then, select “Run” and type “D:\Utility\IPWizard II\setup.exe”, assume D is your CD-ROM drive. 3. The “Welcome to the InstallShield Wizard for PLANET IPWizard II” prompt will display on the screen and click “Next” to continue.
  • Page 13 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue. 5. Please click “Install” to start the installation. 6. Please click “Finish” to complete the installation and launch program immediately.

  • Page 14: Preparation

    2.5 Preparation When you installed the camera on a LAN environment, you may execute PLANET IPWizard II to discover camera’s IP address and set up related parameters in the camera. 2.5.1 Search and View by PLANET IPWizard II When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by PLANET IPWizard II or UPnP discovery.

  • Page 15: View

    View If PLANET IPWizard II finds network devices, View button will be available. Please select the device you want to view and click the View button. Then you could see the video from camera directly. Furthermore you could double click the left button of mouse to link to the network device by browser.
  • Page 16 You could modify the relative settings of the selected device. Click “<<” button will quit the LAN setting procedure and click “>>” button will move to next page as below. In case, you do not want to change username and/or password, then just click “Submit” button to perform your setting accordingly.

  • Page 17: Using Upnp Of Windows Xp Or Vista

    2.6 Using UPnP of Windows XP or Vista 2.6.1 Windows XP  UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled device. If the operating system, Windows XP, of your PC is UPnP enabled, the device will be very easy to configure.
  • Page 18 The following screen will appear, select “Networking Services” and click “Details” to continue The “Networking Services” will display on the screen, select “Universal Plug and Play” and click “OK” to continue.
  • Page 19 Please click “Next” to continue The program will start installing the UPnP automatically. You will see the below pop-up screen, please wait while Setup configures the components.
  • Page 20 Please click “Finish” to complete the UPnP installation Double-click “My Network Places” on the desktop, the “My Network Places” will display on the screen and double-click the UPnP icon with Internet camera to view your device in an internet browser.

  • Page 21: Windows Vista

    ICA-H651 – 00304f0a1459 2.6.2 Windows Vista  UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled device. If the operating system, Windows Vista, of your PC is UPnP enabled, the device will be very easy to configure.
  • Page 22 ICA-H651 – 00304fA15075...

  • Page 23: Install The Device Behind A Nat Router

    2.7 Install the Device behind a NAT Router Once installed, the device is accessible on your LAN. To access the device from the Internet you must configure your broadband router to allow incoming data traffic to the device. If the device is installed on the LAN with a router, then it may get a dynamic IP address from the DHCP server.

  • Page 24: Setup Activex To Use The Internet Camera

    2.8 Setup ActiveX to use the Internet Camera The Internet camera web pages communicate with the Internet camera using an ActiveX control. The ActiveX control must be downloaded from the Internet camera and installed on your PC. Your Internet Explorer security settings must allow for the web page to work correctly. To use the Internet camera, user must setup his IE browser as follows: 2.8.1 Internet Explorer 6 for Windows XP ...

  • Page 25: Internet Explorer 7 For Windows Xp

    2.8.2 Internet Explorer 7 for Windows XP  From your IE browse ”Tools” ”Internet Options…” ”Security” ”Custom Level…”, please setup your “Settings” as follow. Set the first 3 items • Allow previously unused ActiveX control to run… • Allows Script lets •...
  • Page 26 From your IE browse ”Tools” ”Internet Options…” ”Security” ”Trusted Sites” ”Custom Level…”, please setup your “Settings” as follow. • Enable “Automatic prompting for ActiveX controls” • Prompt “Initialize and script active controls not marked….” By now, you have finished your entire PC configuration for Internet camera.

  • Page 27: Web-Based Management

    This chapter provides setup details of the Internet camera’s Web-based Interface. 3.1 Introduction The ICA-H651 can be configured with your Web Browser. Before configure, please make sure your PC is under the same IP segment with Internet camera. 3.2 Connecting to Internet Camera Use the following procedure to establish a connection from your PC to the camera.
  • Page 28 Web browser may display the “Security Warming” window, select “Yes” to install and run the ActiveX control into your PC. After the ActiveX control was installed and run, the first image will be displayed. NOTE: If you log in the camera as an ordinary user, setting function will be not available. If you log in the camera as the administrator, you can perform all the settings provided within the device.

  • Page 29: Live View

    3.3 Live View Start-up screen will be as follow no matter an ordinary users or an administrator. Video Profile ActiveX Control Streaming Protocol Language Monitor Image Section Setting Menu Client Menu PTZ Control Image Flip Image Mirror OSD Control Video Information Full Screen 2-Way Audio Monitor Image...
  • Page 30 Image Flip According to camera position, user might need this function to correct the view angle avoiding upside down. User can chose to enable or disable this function by toggling the icon below. : Disable audio uploading function. : Enable audio uploading function. Image Mirror According to camera position, user might need this function to correct the view angle.
  • Page 31 Language The device could provide multiple languages to meet customer’s requirement. Client Setting: Click this button to display the client extra control panel for 2-way Audio and Full Screen. Video Information Display video information including video format, resolution, frame rate and bit rate. PTZ Control Click to display the following control panel: Hide PTZ Control...
  • Page 32 preset locations. Go Tour: Execute the selected camera tour. Auto Pan: Execute the auto pan of camera. While auto pan is running, the camera will swing the camera automatically. Note that the speed of auto pan is fixed and cannot be adjustable. OSD menu control Close OSD Open OSD...

  • Page 33: Activex Control

    3.4 ActiveX Control The plug-in ActiveX control supports a lot of functions by clicking the left mouse button. Note that this feature only supports on the ActiveX control within Microsoft® Internet Explorer. On the ActiveX control icon, click the Left Mouse Button, then a menu pop-up. This menu provides features that are unique to the ActiveX control.

  • Page 34: Digital Zoom

    3.4.1 Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. 3.4.2 Record Click Record to activate this function. Press Record button to start recording. The video file is saved as ASF format into your local PC.

  • Page 35: Snapshot

    3.4.3 Snapshot Click Snapshot to activate this function. Press Snapshot button to take a picture. The image file is saved as JPEG format into your local PC. Select Browser, the pop-up window to select the save path and file name prefix, select OK to continue. If you like to retrieve the saved image, select the file to display the saved image by using any one of graph editing tools.

  • Page 36: Statistics

    3.4.5 Statistics Click Statistics to activate this function. A window will be popup to show the statistics information of the streaming status. NOTE: That this information is the statistics between the device and your local PC. 3.4.6 About Click About to show the ActiveX information...

  • Page 37: Network Configuration

    3.5 Network Configuration Use this menu to configure the network to connect the device and the clients. 3.5.1 Network This section provides the menu of connecting the device through Ethernet cable. MAC address Display the Ethernet MAC address of the device. Note that user cannot change it.
  • Page 38 Subnet Mask Subnets allow network traffic between hosts to be separated based on the network's configuration. In IP networking, traffic takes the form of packets. IP subnets advance network security and performance to some level by organizing hosts into logical groups. Subnet masks contain four bytes and usually appear in the same "dotted decimal"...

  • Page 39: Ddns Server

    3.5.2 DDNS server Stands for Dynamic Domain Name Server The device supports DDNS If your device is connected to xDSL directly, you might need this feature. However, if your device is behind a NAT router, you will not need to enable this feature. Because DDNS allows the device to use an easier way to remember naming format rather than an IP address.

  • Page 40: Pppoe

    DDNS To enable or disable the DDNS service here. Server name Choose the built-in DDNS server. DDNS Host The domain name is applied of this device. User Name The user name is used to log into DDNS. Password The password is used to log into DDNS. 3.5.3 PPPoE PPPoE: Stands for Point to Point Protocol over Ethernet A standard builds on Ethernet and Point-to-Point network protocol.

  • Page 41: Streaming

    PPPoE To enable or disable the PPPoE service here. User Name Type the user name for the PPPoE service which is provided by ISP. Password Type the password for the PPPoE service which is provided by ISP. IP Address / Subnet Shows the IP information got from PPPoE server site.
  • Page 42 RTSP Port Choose the RTSP port. The RTSP protocol allows a connecting client to start a video stream. Enter the RTSP port number to use. The default value is 554. RTP Port Specify the range of transmission port number of video stream. The default range is 50000 to 50999.

  • Page 43: Upnp

    3.5.5 UPnP UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled Network Camera. If your operating system is UPnP enabled, the device will automatically be detected and a new icon will be added to “My Network Places.”...

  • Page 44: Ip Filter

    3.5.6 IP Filter You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter To enable or disable the IP filter function here. IP Filter Policy Choose the filter policy where is denying or allowing.

  • Page 45: Ip Notification

    3.5.7 IP Notification In case the IP address is changed, system is able to send out an email to alert someone if the function is enabled. If enable this function, then the “Send to“ and “Subject” field SMTP Notification (e-mail) need to be filled.
  • Page 46 HTTP Login name Type the user name for the HTTP server. HTTP Login Password Type the password for the HTTP server. Proxy Address Type the server name or the IP address of the HTTP Proxy. Proxy Port Set port number of Proxy. Proxy Login name Type the user name for the HTTP Proxy.

  • Page 47: Camera Configuration

    3.6 Camera Configuration Use this menu to set the function of the camera of Internet camera 3.6.1 Picture Color Level It changes the image shadows, midtones and highlights. Can adjust an image's tonal range and contrast Brightness Large value will brighten camera. Contrast Large value will contrast camera heavily.

  • Page 48: Ptz Setting

    3.6.2 PTZ Setting Camera Protocol This device can connect to a PTZ camera or speed dome camera and controls them thru RS-485 interface. Note: please DO NOT change the default value if unnecessary. If so, user needs to check and set value properly for both sides. Camera Address This is the camera ID set in PTZ camera or speed dome camera.

  • Page 49: Preset Setting

    OSD Down Control commands for Down function. OSD Left Control commands for Left function. OSD Right Control commands for Right function. 3.6.3 Preset Setting This page provides the edit tool to modify or delete the “Preset Setting” item by item.

  • Page 50: Tour Setting

    3.6.4 Tour Setting Up to 64 positions can be preset, and the camera can be programming to move to the preset position sequentially. Tour Name The group name of the sequence of camera tour. The maximum number of camera tour is 16. Running Enable or disable this camera tour.

  • Page 51: System

    3.7 System Use this menu to perform the principal settings of Internet camera. 3.7.1 System Device title You can enter the name of this unit here. It’s very useful to identify the specific device from multiple units. Software version This information shows the software version in the device. Network LED Switch the LED light of this Internet camera on or off, that Network LEDs will stop working, in case you don’t want other people know the...

  • Page 52: Date & Time

    3.7.2 Date & Time You can setup the time setting of Internet camera, make it synchronized with PC or remote NTP server. Also, you may select the correct time zone of your country. Server Date & Time Displays the date and time of the device PC Time Displays the date and time of the connected PC Synchronize...

  • Page 53: Maintenance

    Daylight Saving Sets up the date and time of daylight saving start time. Start Time Daylight Saving Sets up the date and time of daylight saving stop time. Stop Time Daylight Saving Sets up the date of daylight saving offset. Offset 3.7.3 Maintenance Default Settings...
  • Page 54 8. A message will be shown while the firmware upgraded. Once the upgrading process completed, the device will reboot the system automatically. 9. Please wait for 80 seconds, and then you can use PLANET IPWizard to search the device again.

  • Page 55: Video

    3.8 Video This device provides more video profiles as below to support different request to each client simultaneously. Each user can choose his preferred video profile as his request independently. 3.8.1 Common Text Overlay There are some important information can be embedded into image, Setting including date, time, and/or text.

  • Page 56: H264 Profile

    3.8.2 H264 Profile It’s H.264 encoder mode in this profile. Resolution There are four resolutions in this profile: D1(4CIF), CIF and QCIIF. Rate Control Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR). For CBR, the video bit rate is between low to high bandwidth based on different resolutions.

  • Page 57: Mpeg4 Profile

    3.8.3 MPEG4 Profile It’s MPEG4 encoder mode in this profile. Resolution There are three resolutions in this profile: D1(4CIF), CIF and QCIF. Rate Control Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR). For CBR, the video bit rate is between low to high bandwidth based on different resolutions.

  • Page 58: Mjpeg Profile

    3.8.4 MJPEG Profile It’s M-JPEG mode in this profile. Resolution There are four resolutions in this profile: D1(4CIF), CIF, QCIF. Rate Control The quality level is between 1 and 100. The higher value can reach the better quality but of course will consume higher bandwidth. Max Frame Rate Defines the targeted frame rate of this profile.

  • Page 59: Audio Configuration

    3.9 Audio Configuration Audio: To enable or disable audio function Mute While PT Mute the audio while pan and/or tilt motion Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: To adjust gain of output audio...

  • Page 60: User Privilege Access Configuration

    3.10 User Privilege Access Configuration Use this menu to set the user names and password of the Administrator and up to 10 users, and access right of each user. Viewer login Select “Anonymous” to allow any one viewing the video once connected.

  • Page 61: E-Mail Configuration

    3.11 E-Mail Configuration You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering. SMTP Server Type the SMTP server name or the IP address of the SMTP server.

  • Page 62: Object Detection

    3.12 Object Detection Use this menu to specify motion detection window 1 to window 4 and set the conditions for detection while observing a captured image. Add and Del To add or delete the motion windows. User can specify up to 4 Included and/or Excluded windows to monitor the video captured by this device.

  • Page 63: Event Server Configuration

    3.13 Event Server Configuration 3.13.1 FTP Server You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP.

  • Page 64: Tcp Server

    3.13.2 TCP Server In addition to send video file to FTP server, the device also can send event message to specified TCP server. Name User can specify multiple TCP servers as wish. Therefore, user needs to specify a name for each TCP server setting. TCP Server Type the server name or the IP address of the TCP server.

  • Page 65: Http Server

    3.13.3 HTTP Server The device also can send event message to specified HTTP server. Name User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. Type the server name or the IP address of the HTTP server. Test Check the HTTP server whether it is available or not.

  • Page 66: Samba Server

    3.13.4 SAMBA Server The device also can send video stream to specified SAMBA server. Most of the time, the SAMBA server will be another PC or NAS server. Name User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. SAMBA Server Type the server name or the IP address of the SAMBA server.

  • Page 67: Event Schedule Configuration

    3.14 Event Schedule Configuration This menu is used to specify the schedule of Events and activate the some actions provided by this device.     Name Name of the Event or Schedule. Enable Enable or disable this Event or Schedule. Type Schedule start with Event trigger or Schedule trigger.
  • Page 68 Example1. Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page)
  • Page 69 Example2. Send file to E-Mail server by motion triggered from Friday 18:00 to Saturday 06:00 Select event trigger. Enable time: start from Friday 18:00 and keep work in 12 hours, so it will stop on Saturday 06:00. Trigger by : Motion Area (Added in Object Detection page) Action : Send e-mail (Add in E-Mail page) To email address: You need to input the receiver email address.
  • Page 70 Example3. Send file to E-Mail server by motion triggered from Friday 18:00 to 24:00 from Monday to Friday. 1. Type: Select schedule trigger and interval is 10-minute. 2. Enable Time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hours.

  • Page 71: Record Configuration

    3.15 Record Configuration User can choose the type of record file for event or schedule application. Record File Type Choose AVI or JPEG file format. Record File Prefix Define the prefix of recorded filename. JPEG Picture Numbers Define the picture capture method.

  • Page 72: Appendix A: Alarm I/O Connector

    Appendix A: Alarm I/O Connector Some features of the Camera can be activated by the external sensor that senses physical changes in the area Camera is monitoring. These changes can include intrusion detection or certain physical change in the monitored area. For examples, the external sensor can be a door switch or an infrared motion detector.
  • Page 73 Explanation of External I/O Circuit Diagram: CAUTION! The low voltage/current circuits and high voltage/current circuits are in the network camera circuit. The qualified electrician should do the wring not by yourself incorrect wiring could damage network camera. You could receive the fatal electric shock.

  • Page 74: Appendix B: Ping Ip Address

    Appendix B: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm Internet camera installed or if the IP address conflicts with any other devices over the network.

  • Page 75: Appendix C: 3Gpp Access

    Appendix C: 3GPP Access To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. Note That to use the 3GPP function, it strongly recommends to install the Networked Device with a public and fixed IP address without any firewall protection.

  • Page 76: Appendix D: Bandwidth And Video Size Estimation

    Appendix D: Bandwidth and Video Size Estimation The frame rate of video transmitted from the Internet camera depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements for your Internet camera. The required bandwidth depends on content of video source.

  • Page 77: Appendix E: Ddns Application

    Appendix E: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like www.yourname.com, www.yourname.com.tw etc. (Note: This domain must be registered with Internic via registration authorities such as Network Solutions, DirectNIC, Register.com etc).
  • Page 78 (3). After the columns show up at the left side, click “Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and finish creating an account...
  • Page 79 Click these two options (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Click to confirm Then DDNS you applied activated.
  • Page 80 (6). Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS server. Input your account (7). If the correct username and password are input, you can see the following picture at the top-right of the login page.
  • Page 81 (9). Click the “ Dynamic DNS ”. (10). Click the “Create Hosts”. (11). We could create a domain name without any charge at this step. First, we input the host name. (No.1) Then we pick a domain that is easy to remember. Finally (No.2), click the “Add Host”...

  • Page 82: Appendix F: Configure Port Forwarding Manually

    Manually setup the device with a fixed IP address, for example, 192.168.0.100. 2. Access the Router with Your Web browser The following steps generally apply to any router that you have on your network. The PLANET WNRT-620 is used as an example to clarify the configuration process. Configure the initial settings of the router by following the steps outlined in the router’s Quick Installation Guide.
  • Page 83 Your WAN IP Address will be listed here. 3. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet. The router connects to the Internet over a series of numbered ports.
  • Page 84 A check mark appearing before the entry name will indicate that the ports are enabled. NOTE Some ISPs block access to port 80. Be sure to check with your ISP so that you can open the appropriate ports accordingly. If your ISP does not pass traffic on port 80, you will need to change the port the camera uses from 80 to something else, such as 8080.

  • Page 85: Appendix G: Power Line Frequency

    Appendix G: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS *Neutral and line wires are reversed from that Argentina 220V 50 Hz used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. Australia 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found.

  • Page 86: Appendix H: Troubleshooting & Frequently Asked Questions

    3 seconds on the device. 2. Reconfigure the device. Forgot the IP address of the Check IP address of device by using the PLANET IPWizard II device. program or by UPnP discovery or set the device to default by Reset...
  • Page 87 Do not connect device over a router. PLANET IPWizard II program cannot detect device over a router. If IP address is not assigned to the PC which running PLANET IPWizard II program, then PLANET IPWizard II program cannot find device. Make sure that IP address is assigned to the PC properly.
  • Page 88 Make sure the http port used by the Network Camera, default=80, is forward to the Network Camera’s private IP address. The port number assigned in your Network Camera might not be available via Internet. Check your ISP for available port. The proxy server may prevent you from connecting directly to the Network Camera, set up not to use the proxy server.
  • Page 89 Make sure that the device isn’t conflicting with any other web server running on your LAN. Check the configuration of the router settings allow the device to be accessed outside your local LAN. Check the bandwidth of Internet connection. If the Internet bandwidth is lower than target bit rate, the video streaming will not work correctly.
  • Page 90 The color of the image is poor or Adjust White Balance. strange. To insure the images you are viewing are the best they can be, set the Display property setting (color quality) to 16bit at least and 24 bit or higher if possible within your computer. The configuration on the device image display is incorrect.

  • Page 91: Appendix I: Product Specification

    Appendix I: Product Specification Product ICA-H651 Video Specification Horizontal Resolution 480 TV Lines Sensor 1/4” Color SONY super HAD CCD Frequency: 15,734 Hz (H), 60 Hz (V), Pixel: 811(H) x 508(V) Sensor Elements Frequency: 15,625 Hz (H), 60Hz (V), Pixel: 795(H) x 596(V)

  • Page 92: Ec Declaration Of Conformity

    *Model Number: ICA-H651 * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address: 11F, No 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC,).

Table of Contents