Network Failure Detection - Planet ICA-H652 User Manual

Save
Click the Save button to save all the Motion Detection settings mentioned above.

4.3.10 Network failure detection

Network Failure Detection allows the IP Camera to ping another IP device (e.g. NVR, VSS, Video
Server, etc.) within the network periodically and generates some actions in case of network failure
occurs, for instance, a Video Server is somehow disconnected
The Tampering setting can be found under this path: System> Network failure detection
Being capable of implementing local recording (through Micro SD card) when network failure happens,
the IP Camera could be a backup recording device for the surveillance system.
Detection Switch
You will be able to turn on/off or by schedule for Network Failure Detection in System section.
Default setting is Off.
Detection Type
Input the IP device address and the period of ping time to ping. The ping time
setting range is from 1 to 99 minutes.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when network failure is detected. All options
are listed as follows:
•
Enabling Alarm Output 1/2
Check the items and select the predefined type of alarm output to enable alarm relay outputs when
tampering is detected.
H.264 36x Outdoor Speed Dome Internet Camera
- 69 -
ICA-H652