Ip Filter - Planet ICA-H652 User Manual

4 . 3 .2 .3 I P F i lt er
The IP Filter setting can be found under this path: System> Security> IP Filter.
Using the IP filter, access to the IP Camera can be restricted by denying/allowing specific IP addresses.
Enabling IP Filter
Check the box to enable the IP Filter function. Once enabled, the listed IP addresses (IPv4) will be
allowed/ denied access to the IP Camera.
Select <Allow> or <Deny> from the drop-down list and click on the <Apply> button to determine the IP
Filter behavior.
Adding/ Deleting IP Address
Input the IP address and click on the <Add> button to add a new filtered address.
The Filtered IP Addresses list box shows the currently configured IP addresses. Up to 256 IP address
entries may be specified.
To remove an IP address from the list, please select the IP and then click the <Delete> button.
H.264 36x Outdoor Speed Dome Internet Camera
- 46 -
ICA-H652