Planet ICA-H652 User Manual page 70

•
Recording Stream to SD Card
Select this item and the Tampering Alarm recording will be stored in Micro SD/ SDHC card when
tampering is detected.
Pre-trigger buffer recording function allows users to check what causes the trigger. The pre-trigger
buffer time range is from 1 to 3 seconds. Select <Upload for __ sec> to set the recording duration after
alarm is triggered. The setting range is from 1 to 99999 seconds. Select <Upload during the trigger
active> to record the triggered video until the trigger is off.
Please make sure the local recording (with Micro SD/ SDHC card) is activated so that
this function can be implemented. Refer to Recording for further details.
•
Sending Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP and/or E-Mail when tampering
is detected.
•
Uploading Image by FTP
Select this item and the Administrator can assign an FTP site and configure various parameters. When
tampering is detected, event images will be uploaded to the appointed FTP site.
•
Uploading Image by E-Mail
Select this item and the Administrator can assign an e-mail address and configure various parameters.
When tampering is detected, event images will be sent to the appointed e-mail address.
Make sure SMTP or FTP configuration has been completed. Refer to Mail and FTP for
further details.
•
Sending HTTP notification
H.264 36x Outdoor Speed Dome Internet Camera
- 70 -
ICA-H652