Factory Default; Software Version - Planet ICa-H612 User Manual

4.3.14 Factory Default

The factory default setting page is shown as below. Follow the instructions to reset the IP Camera to
factory default setting if needed.
Set Default
Click on the "Set Default" button to recall the factory default settings. Then the system will restart in 30
seconds.
NOTE: The IP address will be restored to default.
Reboot
Click on the "Reboot" button, and the system will restart without changing current settings.

4.3.15 Software Version

The current software version is displayed in the software version page, which is shown as the figure
below.
- 52 -