Appendix A: Factory Default - Planet ICA-HM316W User Manual

Appendix A: Factory Default

To recover the default IP address and password, please follow the following steps.
1. Removing an Ethernet cable. (Please unplug the power, and remove the Ethernet cable too)
2. Plugging "a pink default cable" into "GND".
3. Plug power cable. (Plug in the power, please don't plug the Ethernet cable.)
4. When camera starts again, please wait 10 seconds, then remove the pink default cable.
5. Then unplug the power, after 5sec, re-plug the power and plug Ethernet cable.
6. Use the IPInstaller utility to search your ICA-HM316W.
7. Re-login the camera using the default IP (http://192.168.0.20), and user name (admin),
password (admin).
52