Sequence - Planet ICA-H652 User Manual

H.264 36x Outdoor Speed Dome Internet Camera
ICA-H652
Select the specified Auto Pan Path from the drop-down list, press the "Run" button, and then the
camera will start moving horizontally as recorded.
To view the camera panning in full screen mode, please move the cursor onto the live view pane,
right-click and left-click to select "fullscreen". Then users can view the camera navigation in full screen.
To stop running an Auto Pan Path, simply move the cursor to the live view pane and move the camera
in any direction.

4.5.4 Sequence

The Sequence Line Programming can be found under this path: PTZ> Sequence.
The Speed Dome IP Camera supports totally eight Sequence Lines; each Sequence Line consists of
up to 64 Preset Points. Please refer to the instructions below to program a Sequence Line.
Before setting this function, users must pre-define at least two Preset Points.
Sequence Setting
Please press the "Edit" button in "Sequence Setting" section to enter the Sequence setting menu as
shown on the next page.
- 95 -