When motion is detected, the signals will be displayed on the Motion window as shown below.
Detailed settings of Motion Detection are described as follows:
Motion Detection
You will be able to turn on/off or by schedule for Motion Detection in System section. Default setting is
Off.
Motion Detection Setting
Users could adjust various parameters of Motion Detection in this section.
•
Sampling pixel interval [1-100]:
The default value is 10, which means system will take one sampling pixel for every 10 pixel.
•
Detection level [1-100]:
The default level is 10. The item is to set detection level for each sampling pixel; the smaller the value,
the more sensitive it is.
H.264 36x Outdoor Speed Dome Internet Camera
- 66 -
ICA-H652