Planet ICA-H652 User Manual page 67

•
Sensitivity level [1-100]:
The default level is 80, which means if 20% or more sampling pixels are detected differently, system will
detect motion. The bigger the value, the more sensitive it is. Meanwhile, when the value is bigger, the
red horizontal line in the motion indication window will be lower accordingly.
•
Time interval (sec) [0-7200]:
The default interval is 10. The value is the interval between each detected motion.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when motion is detected. All options are listed
as follows:
•
Enabling Alarm Output 1/2
Check the item and select the predefined type of alarm output to enable alarm relay output when
motion is detected.
•
Sending Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP and/or E-Mail when motion is
detected.
•
Uploading Image by FTP
Select this item, and the Administrator can assign a FTP site and configure various parameters as
shown in the figure below. When motion is detected, event images will be uploaded to the appointed
FTP site.
•
Uploading Image by E-Mail
Select this item, and the Administrator can assign an e-mail address and configure various parameters
as shown in the figure below. When motion is detected, event images will be sent to the appointed
e-mail address.
H.264 36x Outdoor Speed Dome Internet Camera
- 67 -
ICA-H652