Planet ICA-H652 User Manual page 23

Use only the power adapter shipped with the unit to ensure correct functionality
STEP 14.
Connect the network cable with switch. The speed dome can be configured without external power if
connected to IEEE 802.3at High Power over Ethernet (PoE plus) switch.
User PC
(192.168.0.X)
1. For ICA-HM620, if there is a need to operate the Heater, please plug the AC 24V cable
into the Camera's Power Connector to power up the Camera instead. Heater can only be
powered by the 24VAC adapter.
2. For ICA-H652, the Heater can be powered by the 24VAC adapter or 60-watt PSE device.
STEP 15.
Set your computer's IP address to 192.168.0.x, where x is a number between 1 and 253 (except 20 which is
being used for the camera by default). If you don't know how to do this, please ask your network administrator.
STEP 16.
Use web browser (Internet Explorer 6.0 or above) to connect to 192.168.0.20 (type this address in the address
bar of web browser). You'll be prompted to input user name and password: admin and admin
Ethernet Switch
- 23 -
H.264 36x Outdoor Speed Dome Internet Camera
Speed Dome
ICA-H652
AC