Appendix E: Frequently Asked Questions - Planet ICA-H652 User Manual

Appendix E: Frequently Asked Questions

Q1 [ICA-H652] How can I know the IP address of IP camera?
The default IP address is 192.168.0.20, and you could use the Device Search utility on the
Ans: bundled CD to obtain the current IP address of IP camera. Please refer to the user's manual
for more detailed information.
Q2 [ICA-H652] How to supply power to IP Camera?
To power up the Camera, users could choose either High power over Ethernet or AC 24V. To
use High power over Ethernet, please connect the Ethernet cable to the Camera's Ethernet
Port and plug the other end of the cable into an IEEE 802.3at 60W High Power over Ethernet
(HPoE) injector. To use AC 24V, please plug the AC 24V cable into the Camera's Power
Connector to power up the Camera.
Please kindly check the pin definition of the Power Connector listed above before
connecting to the power source. The AC24V power source should be connected to the
Ans:
first and third pin. The unit might be damaged with wrong connection.
Q3 [ICA-H652] How to reset IP camera to default setting?
To press the E button over 5 seconds at the camera body. Then all of the settings including
network parameters will be back to factory defaults.
Ans:
H.264 36x Outdoor Speed Dome Internet Camera
Pin Definition
AC 24_1
1
2 FG
3
AC 24_2
- 114 -
ICA-H652