Cruise - Planet ICA-H652 User Manual

H.264 36x Outdoor Speed Dome Internet Camera
ICA-H652

4.5.2 Cruise

The Cruise Programming can be found under this path: PTZ> Cruise.
The Speed Dome IP Camera supports up to eight Cruise Paths. Please follow the instructions below for
Cruise Path setup.
Cruise Setting
To set up a Cruise Path, please first select a path number from the drop-down list. Then move the
cursor to the live view pane, and move the camera to a desired view (PTZ controls) as the start point of
a Cruise Path. Press the "Set" button of "Record Start" and start programming the Cruise Path via PTZ
controls. When finishing programming, press the "Set" button of "Record End" to quit. Then this Cruise
Path will be automatically recorded.
Cruise Run
Select the specified Cruise Path from the drop-down list, press the "Run" button, and then the camera
will start touring around as recorded.
To view the camera touring around in full screen mode, please move the cursor onto the live view pane,
right-click and left-click to select "full screen". Then users can view the camera navigation in full screen.
To stop running a Cruise Path, simply move the cursor to the live view pane and move the camera in
any direction.
- 93 -