Example Of Changing Ip Camera's Network Property - Planet ICA-H652 User Manual

Step 4: Double click or right click and select "Browse" to access the camera directly via web browser.
Step 5: Then the prompt window of request for entering default username and password (as shown
below) will appear for logging in to the IP Camera.
The default login ID and password for the Administrator are:
ID and password are case sensitive. It is strongly advised that administrator's password
be altered for the security concerns. Refer to section
Additionally, users can change the IP Camera's network property, either DHCP or Static IP, directly on
the device found list. Refer to the following section for changing the IP Camera's network property.

3.3 Example of Changing IP Camera's Network Property

Users can directly change an IP Camera's network property, e.g. from static IP to DHCP, on the
device found list. The way to change the IP Camera's network property is specified below:
H.264 36x Outdoor Speed Dome Internet Camera
Login ID
admin
- 28 -
Password
admin
Security for further details.
ICA-H652