Planet ICA-H652 User Manual page 49

Please make the record of the IP Camera's MAC address, which can be found in the
label of the camera, for identification in the future.
•
Using fixed IP address
To set up static IP address, select <Use fixed IP address> and move the cursor to the IP address blank
and insert the new IP address, e.g. 192.168.7.123; then go to the Default gateway (to be explained
later) blank and change the setting, e.g. 192.168.7.254. Press <Save> to confirm the new setting.
When using static IP address to login to the IP Camera, users can access it either through "Device
Search" software (refer to User's Manual) or input the IP address in the URL bar and click on <Enter>.
•
IP address
This is necessary for network identification.
•
Subnet mask
It is used to determine if the destination is in the same subnet. The default value is "255.255.255.0".
•
Default gateway
This is the gateway used to forward frames to destinations in a different subnet. Invalid gateway setting
will fail the transmission to destinations in a different subnet.
•
Primary DNS
Primary DNS is the primary domain name server that translates host names into IP addresses.
•
Secondary DNS
Secondary DNS is a secondary domain name server that back ups the primary DNS.
Using PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on the
<Save> button to complete the setting.
Advanced
•
Web Server port
The default web server port is 80. Once the port is changed, the user must be notified of the change for
the connection to be successful. For instance, when the Administrator changes the HTTP port of the IP
Camera whose IP address is 192.168.0.100 from 80 to 8080, the user must type in the web browser
"http://192.168.0.100:8080" instead of "http://192.168.0.100".
•
RTSP port
H.264 36x Outdoor Speed Dome Internet Camera
- 49 -
ICA-H652