Ptz Settings; Preset - Planet ICA-H652 User Manual

kbps (G.726), uLAW (G.711) and ALAW (G.711). Both uLAW and ALAW signify 64 kbps but in different
compression formats. Higher bit rate will let higher audio quality and require bigger bandwidth.
Click "Save" to confirm the setting

4.5 PTZ Settings

Under the tab <PTZ>, there are categories including: <Preset>, <Cruise>, <Auto
Pan>, <Sequence>, <Home>, <Tilt Range>, <Camera- Exposure>, <Camera- WB>,
<Camera- Misc1>, <Camera- Misc2>, and <Camera- Default>.

4.5.1 Preset

The Preset Programming can be found under this path: PTZ> Preset.
Totally 256 Preset Points can be programmed for the Speed Dome IP Camera. Please refer to the
instructions below to set a Preset Point.
Preset Setting
To set up a Preset Point, please first move the cursor to the live view pane. Then left click and drag the
red pointer with PTZ controls to a desired position and adjust the fine zoom/ focus ratio. Subsequently,
assign a number to the current position from the drop-down Number List, and enter its descriptive name.
Click on the button <Set> to save the settings mentioned above.
Preset Go
To have the camera move to a specified Preset position, please select the Preset Point from the
drop-down Preset list. Then the camera will readily move to the target position.
H.264 36x Outdoor Speed Dome Internet Camera
.
- 92 -
ICA-H652