Auto Pan - Planet ICA-H652 User Manual

H.264 36x Outdoor Speed Dome Internet Camera
ICA-H652

4.5.3 Auto Pan

The Auto Pan Programming can be found under this path: PTZ> Auto Pan.
The Speed Dome IP Camera supports four Auto Pan Paths. Please refer to the instructions below to
set an Auto Pan Path.
Auto Pan Setting
To set up an Auto Pan Path, please first select a path number from the drop-down list. Then move the
cursor to the live view pane, and move the camera to a desired view as the Start Point of an Auto Pan
Path. Click the "Set" button of the "Start Point", and the current view will be automatically saved as the
start point of the Auto Pan Path.
The room ratio of an Auto Pan's Start Point will persist throughout the whole path..
Enter the speed ratio into the Speed field; the speed ratio ranges from 0 (low) to 3 (fast). Then choose
to run the Auto Pan Path in right/left direction from the Direction drop-down list.
Move the camera to another desired position as the end point of the Auto Pan Path. Click the "Set"
button of the "End Point" for saving the setting.
Auto Pan Run
- 94 -