5 Mega-pixel Outdoor IR PoE IP Camera
ICA-3550V
Appendix A. Factory Default
To recover the default IP address and password, please follow the steps:
• Remove the power and Ethernet cable.
• Take an electronic wire, plug one side of the wire
into "Default" and the other side into
"G
ND" on the terminal block as the picture is shown below.
• Connect power to the camera again. It takes around 30 seconds to boot the camera.
• Remove the wire and plug in the Ethernet cable after the camera finishes booting.
• Login the camera using the default IP (http://192.168.0.20) where both user name and
password are admin.
63