Default; Auto Maintain - Planet ICA-3480 User Manual

User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P

9.3 Default

In the main interface, click "Maintain  Default" to enter the device recovery default interface,
where you can reset device parameters and reset all the parameters to the factory default, as
shown in Figure 9-3.
【Reset device parameters】IPC will automatically restore the parameters to the factory
parameters except the network parameters.
【Reset all the parameters to the factory default】All parameter settings of IPC will be
automatically restored to the factory parameter settings (please operate this function carefully).

9.4 Auto Maintain

In the main interface, click "Maintain  Auto Maintain" to enter the reboot settings interface,
where you can set the device to restart or set the scheduled reboot time in the drop-down menu.
For example, set the scheduled reboot time in "3:03 on the 3
and then follow the scheduled reboot time the device will reboot automatically shown in Figure
9-4.

In order to avoid overloading the server due to excessive device restarts at
the same time, the background processing logic of the device is to restart
randomly within 1 hour.
Figure 9-3
of each month" and click "Apply",
rd
Figure 9-4
90