Planet ICA-H652 User Manual page 61

Make sure SMTP or FTP configuration has been completed. See section Mail and FTP
for further details.
One of the streams has been set to M-JPEG compression; otherwise, the image couldn't
be uploaded by E-mail of FTP.
• PTZ Function
Assign a camera function: Preset, Sequence, Auto pan or Cruise, and specify a Preset Point/Sequence
Line/Auto pan Path/Cruise Line for the camera to perform at an alarm occurrence.
Please refer to the sections through Preset Programming to Sequence Line
Programming for details of Preset Point / Sequence Line / Auto pan Path / Cruise Line
setups.
If the selected function is "Preset," it is required to enter its dwell time (1 ~ 256 sec.) in the
corresponding field as shown below. When the alarm is triggered, the camera will go to the selected
H.264 36x Outdoor Speed Dome Internet Camera
- 61 -
ICA-H652