Application (Alarm Settings) - Planet ICA-H652 User Manual

4.3.8 Application (Alarm Settings)

The Application setting can be found under this path: System> Application.
The Camera is equipped with four alarm inputs and two relay outputs for cooperating with alarm system
to catch events' images. Please refer to the Alarm Pin Definition shown below.
Pin
1 ALARM_OUT_NO_1
2 ALARM_OUT_NC_1
3 ALARM_OUT_COM_1
4 GND
5 ALARM_OUT_NO_2
6 ALARM_OUT_NC_2
Alarm Pin Selection
Select an alarm pin which is to be configured from the "Alarm Pin Selection" field. Then press the button
"Edit" below the field to carry on alarm programming.
Alarm Status Settings
The specific alarm pin's property can be programmed in this section as shown below.
Definition
- 58 -
H.264 36x Outdoor Speed Dome Internet Camera
Pin
7 ALARM_OUT_COM_2
8 GND
9 ALARM_IN_4
10 ALARM_IN_3
11 ALARM_IN_2
12 ALARM_IN_1
ICA-H652
Definition