Mitsubishi Lancer Evolution Owner's Manual page 77

Seat and seat belts
Installing a child restraint system to
the lower anchorage (ISOFIX child re-
straint mountings) and tether anchor-
age
Lower anchorage location
Your vehicle's rear seat is fitted with lower ancho-
rages for attaching a child restraint system with ISO-
FIX mountings.
2
2-16
Tether anchorage locations
There are 3 attachment points on the rear shelf, lo-
cated behind the top of your rear seat. These are for
securing a child restraint system tether strap to
each of the 3 rear seating positions in your vehicle.
E00408900664
TOP TETHER
WARNING
l Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehicle.
NOTE
l
Do not use the rear seat centre tether anchor-
age with ISOFIX mountings.
Child restraint system with ISOFIX mountings
The child restraint system is designed only for
seats that incorporate lower anchorages. Retain the
child restraint system using the lower anchorages.
OGEE12E1
It is not necessary to retain the child restraint sys-
tem using the vehicle's seat belts.
A- Child restraint system connectors
To install
1. Remove any foreign material in or around
the connectors and ensure the vehicle seat
belt is in its normal storage position.
2. Push the child restraint system's connectors
(A) into the slit (B) in accordance with the in-
structions provided by the child restraint sys-
tem's manufacturer.