Mitsubishi Multi-Communication System - Mitsubishi Lancer Evolution Owner's Manual

• When A or 1 (language cooperation ena-
bled) has been selected with the language
cooperative control, the language for
MITSUBISHI Multi-Communication
System (MMCS) (if so equipped) or the
®
Bluetooth 2.0 interface (if so equipped)
is automatically changed to the language
selected for the multi-information display.
• When M, 2 or P (language cooperation dis-
abled) has been selected with the lan-
guage cooperative control, the language
for MITSUBISHI Multi-Communication
System (MMCS) (if so equipped) or the
®
Bluetooth 2.0 interface (if so equipped)
is not automatically changed to the lan-
guage selected for the multi-information
display.
Operation sound setting
E00523400616
You can turn off the operation sounds of the multi-
information meter switch and daytime dipper button.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-15.
2. Lightly press the multi-information meter
switch to select " " (operation sound setting).
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
in sequence from ON (operation sound on)
→ OFF (operation sound off) → ON (opera-
tion sound on).
The setting is changed to the selected condi-
tion.
NOTE
l The memory of the operation sound setting
is erased if the battery is disconnected, and it
returns automatically to ON (operation
sound on).
l
The operation sound setting only deactivates
the operation sound of the multi-information
meter switch and daytime dipper button. The
warning display and other sounds cannot be
deactivated.
Changing the time until "REST REMINDER" is
displayed
E00523500617
The time until the display appears can be changed.
OGEE12E1
Instruments and controls
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-15.
2. Lightly press the multi-information meter
switch to select "ALARM" (rest time setting).
3. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play "ALARM" (rest time setting).
3-19
3