Mitsubishi Lancer Evolution Owner's Manual page 105

Instruments and controls
At that time, when the ignition switch is
switched from "OFF" to "ON", the warning
display is displayed for a few seconds on the
information screen.
3
3. After your vehicle is inspected at a
MITSUBISHI MOTORS Authorized Service
Point, it displays the time until the next peri-
odic inspection.
To reset
The "---" display can be reset while the ignition
switch is "OFF". When the display is reset, the
time until the next periodic inspection is displayed
and the warning display is no longer displayed
when the ignition switch is switched from "OFF"
to "ON".
3-14
1. When you lightly press the multi-informa-
tion meter switch a few times, the informa-
tion screen switches to the service reminder
display screen.
2. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play " " and make it flash. (If there is no op-
eration for about 10 seconds with flashing,
the display returns to the previous screen.)
OGEE12E1
3. Lightly press the multi-information meter
switch while the icon is flashing to change
the display from "---" to "CLEAR". After
this, the time until the next periodic inspec-
tion will be displayed.
CAUTION
l The customer is responsible for making
sure that periodic inspection and mainte-
nance are performed. Inspections and
maintenance must be performed to pre-
vent accidents and malfunctions.
NOTE
l "---"display cannot be reset when the igni-
tion switch is "ON".
l When "---" is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next peri-
odic inspection is displayed.
l If you accidentally reset the display, we rec-
ommend you to consult a MITSUBISHI
MOTORS Authorized Service Point.