Mitsubishi Lancer Evolution Owner's Manual page 258

6. After the device tags of all paired Bluetooth
devices have been read, the system will say
"End of list, would you like to start from the
beginning?"
To hear the list again from the beginning, an-
swer "Yes."
When you are done, answer "No" to return to
the main menu.
NOTE
l If you press and release the SPEECH button
and say "Continue" or "Previous" while the
list is being read, the system will advance or
rewind the list.
Say "Continue" to proceed to the device with
the next highest number or "Previous" to re-
turn to the phone with the previous number.
l You can change the device tag by pressing
and releasing the SPEECH button and then
saying "Edit" while the list is being read.
l You can change the phone to be connected
by pressing and releasing the SPEECH but-
ton and then saying "Select phone" while the
list is being read.
l You can change the music player to be con-
nected by pressing and releasing the
SPEECH button and then saying "Select mu-
sic player" while the list is being read.
Changing a device tag
E00760900018
You can change the device tag of a paired cellular
phone or music player.
Follow the steps below to change a device tag.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing options."
® 4. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say "Ed-
it."
5. The voice guide will say "Please say," and
read out the numbers of the Bluetooth
ces and device tags of corresponding devices
in order, starting with the Bluetooth
has been most recently connected.
After all paired device tags have been read,
the voice guide will say "Which device,
please?" Say the number of the device tag
you want to change.
NOTE
l You can press and release the SPEECH but-
ton while the list is being read, and immedi-
ately say the number of the device tag you
want to change.
6. The voice guide will say "New name,
please." Say the name you want to register as
a new device tag.
When the confirmation function is on, the
voice guide will say "<New device tag>. Is
this correct?" Answer "Yes."
Answer "No," you can say the new device
tag you want to register again.
7. The device tag is changed.
When the change is complete, the voice
guide will say "New name saved" and then
the system will return to the main menu.
Operating a music player connected
®
via Bluetooth
For the operation of a music player connected via
®
Bluetooth , refer to "To play tracks from a Blue-
®
tooth device" on page 5-49.
OGEE12E1
How to make or receive hands-free calls
You can make or receive hands-free calls using a
®
Bluetooth compatible cellular phone connected to
® ®
devi- the Bluetooth 2.0 interface.
You can also use the phone books in the Blue-
® ®
that tooth 2.0 interface to make calls without dialling
telephone numbers.
To make a call ® p. 5-71
Send function ® p. 5-73
Receiving calls ® p. 5-73
Mute function ® p. 5-73
Switching between hands-free mode and private
mode ® p. 5-73
NOTE
l
The hands-free calls might not be operated
correctly when it makes calling or receiving
by operating the cellular phone directly.
To make a call
You can make a call in the following 3 ways using
®
the Bluetooth 2.0 interface:
Making a call by saying a telephone number, mak-
ing a call using the Bluetooth
phone book, and making a call by redialing.
Making a call by using the telephone number
You can make a call by saying the telephone number.
1. Press the SPEECH button.
2. Say "Dial."
3. After the voice guide says "Number please,"
say the telephone number.
E00761000016
For pleasant driving
E00761100046
5
E00761200135
®
2.0 interface's
5-71