Mitsubishi Lancer Evolution Owner's Manual page 172

CAUTION
l
The S-AWC control mode display may
flash under aggressive driving conditions.
At this time, S-AWC control is temporari-
ly suspended in order to protect the S-
AWC device, but this will not affect nor-
mal driving.
After the vehicle is driven for a while, if
the S-AWC control mode display remains
on, the S-AWC control will start operat-
ing again.
S-AWC operation display
E00623100122
The S-AWC operation status can be displayed on
the information screen in the multi-information dis-
play.
To display the status, press the multi-information
meter switch to change the information screen.
Refer to "Information screen (when the ignition
switch is "ON")" on page 3-08.
Display example
The S-AWC operation status is displayed.
AYC operation display
The amount of the yaw moment added by AYC is
displayed as a bar graph.
A, D- Clockwise yaw moment about the ve-
hicle's centre of gravity
B, C- Anticlockwise yaw moment about the
vehicle's centre of gravity
ACD operation display
The strength of the differential limiting action (cen-
tre differential) of the ACD is displayed in section
(E) of the meter as a bar graph.
WARNING
l Always concentrate on your driving first.
Keep your eyes and mind on the road. Dis-
tractions while driving can lead to an ac-
cident.
S-AWC warning display
E00623200093
When there is a malfunction in the system, the
warning display will appear on the information
screen in the multi-information display.
OGEE12E1
Starting and driving
In addition, the S-AWC control mode display in sec-
tion (A) will go out at the same time.
CAUTION
l
The system may be malfunctioning.
Park your vehicle in a safe place and stop
the engine. Restart the engine and check
whether the warning display goes out.
If the goes out, there is no abnormal
condition. If the warning display does
not go out or appears frequently, it is not
necessary to stop the vehicle immediately,
but we recommend you to have your vehi-
cle inspected.
4
4-31