Mitsubishi Lancer Evolution Owner's Manual page 108

1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-15.
2. Lightly press the multi-information meter
switch to select "AVG UNIT (fuel consump-
tion display setting)".
3. Press and hold the multi-information meter
switch for about 2 seconds or more to dis-
play "AVG UNIT" (fuel consumption dis-
play unit setting).
4. Lightly press the multi-information meter
switch to switch in sequence from km/L →
L/100 km → mpg (US) → mpg (UK) → RE-
TURN → km/L.
5. Press and hold the multi-information meter
switch for about 2 seconds or more to change
the setting to the selected unit.
NOTE
l The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
switched, but the units for the indicating nee-
dle (speedometer), the odometer and the trip-
meter will remain unchanged.
l The memory of the unit setting is erased if
the battery is disconnected, and it returns au-
tomatically to L/100 km.
The distance and speed units are also switched in
the following combinations to match the selected
fuel consumption unit.
OGEE12E1
Instruments and controls
Fuel consump- Distance (driv- Speed (average
tion ing range) speed)
L/100 km km km/h
mpg (UK) mile (s) mph
mpg (US) mile (s) mph
km/L km km/h
Changing the temperature unit
E00523100567
The display unit for temperature can be switched.
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-15.
2. Lightly press the multi-information meter
switch to select " " (temperature unit set-
ting).
3
3-17