Mitsubishi Lancer Evolution Owner's Manual page 218

TP (Traffic information Program) search function
E00721800096
The traffic information program standby function
is turned on (with the TP indicator (11) shown on
the display) and after about 45 seconds since the
RDS indicator (10) turns off due to weak signal or
the tuning station is changed over from a TP sta-
tion to a station which does not broadcast traffic in-
formation, the sound will beep 5 times and seeks
out a TP station in all frequencies automatically.
The TP search function can be turned ON and
OFF. Refer to "Function setup mode" on page
5-31.
Emergency broadcasts
E00721700125
If an emergency broadcast is caught while receiv-
ing a FM broadcast or playing back a compact disc
with the ignition switch in "ACC" or "ON" posi-
tion, the display will show "ALARM" and the emer-
gency broadcast will interrupt the current program.
The volume level is set separately for listening to
normal audio programmes and for listening to emer-
gency broadcasts. The volume level will therefore
change automatically to that set when an emergen-
cy broadcast or traffic information broadcast was
last received. When the emergency broadcast is
over, the radio will return to the previously re-
ceived program and to the corresponding volume
level.
OGEE12E1
For pleasant driving
Function setup mode
E00722500380
It is possible to change the following functions:
l AF
l CT
l REG
l
TP-S
l PI-S
l Language of PTY display
l SCV
1. Press the TUNE switch (6) for 2 seconds or
longer to select the function setup mode.
5
5-31