Mitsubishi Lancer Evolution Owner's Manual page 256

NOTE
l ®
You cannot pair Bluetooth devices with the
®
Bluetooth 2.0 interface unless the vehicle is
®
parked. Before pairing a Bluetooth
®
with the Bluetooth 2.0 interface, confirm
that the vehicle is parked in a safe location.
2. Press the SPEECH button.
3. Say "Setup".
4. Say "Pairing options."
5. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say
"Pair."
NOTE
l If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the pair-
ing process. To register a new device, delete
one device and then repeat the pairing process.
(Refer to "Selecting a device: Deleting a de-
vice" on page 5-69.)
6. The voice guide will say "Please say a 4-dig-
it pairing code." Say a 4-digit number.
When the confirmation function is on, the sys-
tem will confirm whether the number said is
acceptable. Answer "Yes."
Answer "No" to return to pairing code selec-
tion.
NOTE
l ®
Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
l The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
to select.
device
Remember the pairing code as it needs to be
®
keyed into the Bluetooth
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
®
tooth device to the Bluetooth
face. For the default connection settings, re-
fer to the instructions for the device.
7. The voice guide will say "Start pairing proce-
dure on the device. See the device manual
for instructions." Enter in the Bluetooth
vice the 4-digit number you have registered
in Step 6.
NOTE
l According to the corresponding device to
®
Bluetooth , it might take a few minutes to
®
pair the Bluetooth device with the Blue-
®
tooth 2.0 interface.
l
®
If the Bluetooth 2.0 interface cannot recog-
®
nize the Bluetooth device, the voice guide
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
®
ports Bluetooth , and try pairing it again.
l If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
OGEE12E1
8. The voice guide will say "Please say the
name of the device after the beep." You can
assign a desired name for the Bluetooth
vice and register it as a device tag. Say the
name you want to register after the beep.
device later in the
NOTE
l When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?" An-
® swer "Yes."
2.0 inter-
To change the device tag, answer "No" and
then say the device tag again.
9. The voice guide will say "Pairing complete,"
after which a beep will be played and the pair-
ing process will end.
®
de-
Selecting a device
If multiple paired Bluetooth
in the vehicle, the cellular phone or music player
most recently connected is automatically connected
®
to the Bluetooth 2.0 interface.
You can connect to the other paired cellular phone
or music player by following setting change proce-
dures.
To select a cellular phone
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select phone."
4. After the voice guide says "Please say," the
numbers of the cellular phones and device
tags of corresponding cellular phones will be
read out in order, starting with the cellular
phone that has been most recently connected.
Say the number of the cellular phone that
you want to connect to.
For pleasant driving
®
de-
E00760700090
®
devices are available
5
5-69