Mitsubishi Lancer Evolution Owner's Manual page 107

Instruments and controls
4. Select the item to change on the menu screen
and change to the desired setting. Refer to
the following items for further details on the
operation methods.
Refer to "Changing the reset mode for aver-
age fuel consumption and average speed" on
page 3-16.
Refer to "Changing the fuel consumption dis-
play unit" on page 3-16.
Refer to "Changing the temperature unit" on
page 3-17.
Refer to "Changing the display language" on
page 3-18.
Refer to "Changing the language cooperative
3
control*" on page 3-18.
Refer to "Operation sound setting" on page
3-19.
Refer to "Changing the time until "REST RE-
MINDER" is displayed" on page 3-19.
Refer to "Changing the turn-signal sound"
on page 3-20.
Refer to "Changing the momentary fuel con-
sumption display" on page 3-20.
Refer to "Returning to the factory settings"
on page 3-20.
Changing the reset mode for average fuel con-
sumption and average speed
The mode conditions for the average fuel consump-
tion and average speed display can be switched be-
tween "Auto reset" and "Manual reset".
3-16
1. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
from the setting mode screen to the menu
screen.
Refer to "Changing the function settings
(when the ignition switch is "ON")" on page
3-15.
2. Lightly press the multi-information meter
switch to select "AVG (average fuel consump-
tion and average speed setting)".
3. Press and hold the multi-information meter
switch for about 2 seconds or more to switch
in sequence from A or 1 (Auto reset mode)
→ M, 2 or P (Manual reset mode) → A or 1
(Auto reset mode).
The setting is changed to the selected mode
E00522900890
condition.
Manual reset mode
l
When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
OGEE12E1
l When the ignition switch is switched from
"ACC" or "LOCK" to "ON", the mode set-
ting is automatically switched from manual
to auto.
Switching to auto occurs automatically. If
switching to manual mode is done, however,
the data from the last reset is displayed.
Auto reset mode
l When the average fuel consumption and aver-
age speed are being displayed, if you hold
down the multi-information meter switch,
the average fuel consumption and average
speed displayed at that time are reset.
l If the ignition switch is at "ACC" or
"LOCK" for about 4 hours or longer, the aver-
age fuel consumption display and average
speed display are automatically reset.
NOTE
l The average speed display and the average
fuel consumption display can be reset individ-
ually for the auto reset mode and manual re-
set mode.
l The average speed display memories and aver-
age fuel consumption memories for auto re-
set mode and manual reset mode are erased
if the battery is disconnected.
l The initial (default) setting is "Auto reset
mode".
Changing the fuel consumption display unit
E00523000641
The display unit for fuel consumption can be switch-
ed. The distance, speed, and amount units are also
switched to match the selected fuel consumption
unit.