Mitsubishi Lancer Evolution Owner's Manual page 197

For pleasant driving
Volume and tone control panel
1- PWR (On-Off) switch
2- VOL (Volume control) knob
3- Display
4- SOUND (Sound control) switch
To adjust the volume
5
VOL (Volume control)
Turn the VOL knob (2) clockwise to increase the
volume; anticlockwise to decrease the volume.
To adjust the tone
Press the SOUND switch (4) to select: TYPE →
FIELD → BASS → MID → TREBLE → FADER
→ BALANCE → audio control mode OFF.
QUICK ACCESS MODE
To access the sound customization features quick-
ly, push and hold the SOUND switch (4), then turn
the switch clockwise or anticlockwise to access
your desired sound customization setting. Release
the switch to adjust the setting.
5-10
HOLD MODE
If the SOUND switch (4) is pushed and held for
E00708600752
more than 2 seconds during the audio adjust mode,
it will change to "Hold" mode. The selected audio
mode will be held until the SOUND switch (4) is
pushed for more than 2 seconds again.
TYPE (Acoustic characteristic selection)
1. Turn the SOUND switch (4) to select the de-
sired music type.
2. Press the SOUND switch (4) to set the audio
system to the selected music type.
E00708700258
E00708800754
OGEE12E1
Acoustic char-
Details
acteristics
The optimum acoustic character-
istics for classical music, which
CLASSIC
requires an overall sound bal-
ance that is flat.
The optimum acoustic character-
istics for jazz music, which re-
JAZZ quires an atmospheric sound that
applies different modulations to
the bass, mid-range, and treble.
The optimum acoustic character-
istics for pop music, which re-
POP
quires a crisp vocal sound with a
modulated bass and treble.
The optimum acoustic character-
istics for rock music, which re-
ROCK quires a sound with a sense of
speed that emphasises the mid
range.
The optimum acoustic character-
istics for hip hop music, which
HIP-HOP
requires a powerful sound that
emphasises the bass.
FIELD (Sound field selection)
1. Turn the SOUND switch (4) to select the de-
sired sound field.
2. Press the SOUND switch (4) to set the audio
system to the selected sound field.