Details Of The Menu; The Media Setup Menu - Epson SureColor S30675 User Manual

Details of the Menu

Items or values marked with a superscript "1" apply to the S70675 and S50675; items
marked with a superscript "2" apply to the S50675; items marked with a superscript "3"
apply to the S30670; items marked with a superscript "4" apply to the S70670.

The Media Setup Menu

The Media Setup menu can be accessed directly by pressing the M button.
indicates default settings.
Media Remaining
Item
Remaining Setup
Length
Remaining Alert
Print Remaining Length
Select Media
Parameter
RIP Settings
1 to 30 (media setting bank number)
Parameter Explanation
On Choose On to display and record, or Off to not display and not record, the
amount of media remaining. Length, Remaining Alert, and Print
Off
Remaining Length options are available when On is selected. The display
panel shows the amount of media remaining based on the value selected for
Length and the amount of media used during printing.
1.0 to 999.5 m (3 to Enter a value for overall roll length between 5.0 and 999.5 m (15 to 3000 ft).
3000 ft) You can set in 0.5 m (1 ft) increments.
1 to 15 m (4 to 50 An alert will be displayed if the amount of media remaining reaches this
ft) length. Choose from values between 1 and 15 m (4 and 50 ft). You can set in
0.5m (1ft) increments.
Print Use Print Remaining Length to print the amount of media remaining on the
current roll before replacing it with another type of media. You can then
enter this number as the media length the next time the roll is used.
Explanation
Choose the media settings used for printing.
If RIP Settings is selected, the media settings selected in the software RIP will
be used.
Select a number between 1 and 30 to use the settings in the corresponding
media setting bank. To register a new setting or change a setting, use
Customize Settings.
Using the Control Panel Menu
203