Epson SureColor S30675 User Manual page 115

Table of Contents

Advertisement

You can set the temperatures of the pre-heater, platen heater, and after heater.
Note:
Adjust standard heater temperatures as follows:
❏ Set the heaters to the temperatures recommended in the documentation provided with
the media, if available.
❏ Raise the temperature if the print results are blurred or smudged or the ink clots. Note,
however, that raising the temperature too high can cause the media to shrink, wrinkle,
or deteriorate.
The time needed for the heaters to reach the specified temperatures varies with the
ambient temperature.
❏ Use the r/l buttons to select a heater. From left, the options are pre-heater, platen
heater, and after heater.
❏ After selecting the desired heater, use the d/u buttons to choose the temperature.
❏ Select the desired option and press the Z button.
Additional Dryer
Note:
❏ This menu is displayed only when the optional additional print drying system (supplied
with the S50675; optional with other models) is installed.
❏ The default setting is On, and the drying fan turns on automatically when printing
starts.
❏ Use the d/u buttons to select On or Off.
❏ Press the Z button.
4. Press the y button twice to return to the Customize Settings menu.
5. Use the d/u buttons to choose a value.
6. Select the desired option and press the Z button.
115
Basic Operations

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surecolor s70675Surecolor s50675

Table of Contents