Table of Contents
Advertisement
10
button (heating and drying button)
Pressing this button displays the Heating & Drying menu, where you can adjust the Heater Temperature. If the optional
additional print drying system is attached, you can also adjust Additional Dryer settings. These options can be adjusted
during printing.
See "Heating & Drying" on page 114.
11 # button (maintenance button)
Pressing this button displays the Maintenance menu, which contains such items as Nozzle Check, Cleaning, Head Washing,
Head Maintenance, and Waste Ink Counter. This button is disabled during printing.
See "The Maintenance Menu" on page 211.
12 W button (pause/cancel button)
The printer enters pause status if this is pressed while printing. To release the pause status, press the W button again, or
select Pause Cancel on the screen and then press the Z button. To cancel print jobs being processed, select Job Cancel on
the screen and then press the Z button.
Pressing this button when menus are displayed closes the menus and returns the printer to ready status.
13
button (media feed button)
When the printer is in the ready state, you can feed the media to the cut position by pressing this button and then Z.
See "Cutting media" on page 88.
When printing is in progress, you can use this button to adjust media feed.
See "Feed Adjustment" on page 117.
Understanding the Display
The following illustration shows the display for the S50675.
1 Messages
Displays the printer's status, operation, and error messages.
See "When a Message Is Displayed" on page 215.
22
Introduction
Advertisement
Table of Contents
