Epson SureColor S30675 User Manual page 240

Resolution Number
(dpi) of passes
720×1440 12
S50675
Resolution Number
(dpi) of passes
Banner
720×720 4
Vinyl
720×1440 6
All media (Including Banner/Vinyl)
720×1440 8
If banding cannot be cleared using the settings described above, select the HQ1 mode in
RIP print settings. Stripe banding and tint unevenness will less likely to occur.
If the banding cannot be cleared completely with HQ1 mode, then select HQ2 mode in RIP
print settings. However, graininess might be more obvious than printing with HQ1 mode.
The print speed of HQ1/HQ2 mode becomes lower than other print modes that use the
same number of passes.
Following are examples of the RIP print setting mode. Display of setting mode will be
different depending on the software RIP.
❏ 720x720 4pass (HQ1) / 720x720 4pass (HQ2)
❏ 720x1440 6pass (HQ1) / 720x1440 6pass (HQ2)
❏ 720x1440 8pass (HQ1) / 720x1440 8pass (HQ2)
M/W Result
level
3 Stripe banding less likely
4 Tint unevenness less likely
M/W Result
level
1 Stripe banding less likely
2 Tint unevenness less likely, but stripe banding
more likely
3 Stripe banding less likely
4 Tint unevenness less likely, but stripe banding
more likely
0 Stripe banding less likely
1 Tint unevenness less likely, but stripe banding
more likely
2 Stripe banding less likely
3 Tint unevenness less likely
Recommendation
✓
Recommendation
✓
✓
✓
240
Appendix