Table of Contents
Advertisement
Important:
If the media holding plates are not moved out of the way, media insertion may fail or
damage may occur to the edge of the media.
Hold the tabs on the media holding plates and move the plates to the right and left sides
of the platen.
3. Loosen the left and right roll holder fixing screws sufficiently and separate the roll
holders so that the gap between the two is wider than the media.
Important:
If the right holder handle shaft is not visible, rotate the holder forward until it stops. The
media can not be properly loaded if the handle shaft is not visible.
54
Basic Operations
Advertisement
Table of Contents
