1. Position the print head for maintenance. See "Moving the Print Head" on page 135.
2. Dampen a new cleaning stick with ink cleaner. See "Using Ink Cleaner" on page 136.
3. Clean the top surface of the flushing pad.
Wipe lint and dust with the tip of a cleaning stick.
Important:
Do not deform the metal section of the top surface. Otherwise, it may damage the print
head.
If the ink has solidified and lint and dust cannot be removed, we recommend
exchanging the flushing pad with a new one. See "Replacing the Flushing Pad" on page
172.
4. Close the maintenance cover and press the Z button twice.
The menus will close when the print head returns to its normal position.
See "Disposal of Used Consumables" on page 179.
160
Maintenance