Removing The Take-Up Roll (Using The Standard Take-Up Reel) - Epson SureColor S30675 User Manual

Removing the Take-up Roll (Using the Standard Take-up Reel)

The procedure for removing media varies depending on whether you are using the
supplied auto take-up reel unit or the optional auto take-up reel unit for heavy media.
Follow the steps below when using the supplied auto take-up reel unit.
Caution:
c
Because the media is heavy, it should not be carried by one person. When loading or
removing the media, use at least two persons.
Follow the instructions in the manual when loading media or roll cores or removing media
from the take-up roll.
Dropping media, roll cores, or take-up rolls could result in injury.
1. Cut the media and roll the cut end onto the take-up reel. See "Cutting media" on page
88.
2. To prevent the media from sliding off the roll, support the roll at its left end.
3. Loosen the left roll core holder fixing screw and remove the roll core holder from the roll.
4. Lower the roll onto the roll support.
5. To prevent the media from sliding off the roll, support the roll at its right end.
107
Basic Operations