Table of Contents
Advertisement
21. Close the front cover.
When using the auto take-up reel, see "Using the Auto Take-up Reel Unit" on page 92.
When not using the auto take-up reel, proceed to check the media and change settings.
See "Viewing and Changing Media Settings" on page 85.
Loading Media - S30675
Follow the steps below when using the supplied media feeding unit.
When the Heavy Roll Media Feeding Unit is installed, see "Using the optional heavy roll
media feeding unit" on page 75.
Using the standard media feeding unit
This section describes how to load media when the standard media feeding unit is
installed.
Before loading media, be sure to read "Notes on Loading Media" on page 38.
1. Press the P button, and wait until Load media appears on the screen.
2. Open the front cover, and move the media holding plates out of the way.
Important:
If the media holding plates are not moved out of the way, media insertion may fail or
damage may occur to the edge of the media.
65
Basic Operations
Advertisement
Table of Contents
