Before Printing - Epson SureColor S30675 User Manual

Before Printing

To maintain print quality, perform the following inspection before starting work each day.
❏ Check the amount of ink remaining.
If ink is expended during printing, printing can be resumed once the affected cartridge
has been replaced. However, when replacing ink during a print job, you may see a
difference in color depending on the drying conditions. If you know that the print job will
be a large one, we recommend that you use new cartridges to replace those that are
running low before you start. The old cartridges can be reinserted and used at a later
date.
Ink level is shown by an icon. See "Understanding the Display" on page 22.
If you need to replace cartridges, see "Replacing and Shaking Ink Cartridges" on page
163.
❏ Shake spot color inks.
Spot color inks must be removed and shaken once every 24 hours. Although a
message is displayed in the control panel 24 hours after the inks were last removed, we
recommend that they be removed and shaken before the start of work.
See "Replacing and Shaking Ink Cartridges" on page 163.
❏ Print a check pattern.
Print a check pattern to check for clogged nozzles.
Perform head cleaning if parts of the pattern are faint or missing.
See "Checking for Clogged Nozzles" on page 181 and "Head Cleaning" on page 183.
110
Basic Operations