Epson SureColor S30675 User Manual page 199

Menu Item
Media Setup Media Remaining
See "The Media Setup
Menu" on page 203.
Select Media
Customize Settings
Remaining Setup
Length
Remaining Alert
Print Remaining Length
Current Settings
RIP Settings
Platen Gap
Head Alignment
Standard (Auto)
Standard (Manual)
Block pattern
Roll Type
Tension Measurement
Media Tension
Restore Settings
1 to 30 (media setting bank)
Setting Name
Platen Gap
Auto Media Adjust
Media Adjust
Feed Adjustment
Head Alignment
Heating & Drying
Heater Temperature
Drying Time Per Pass
After Heater Feed
Additional Dryer
Advanced Settings
Parameter
On, Off
1.0 to 999.5 m (3 to 3000 ft)
1 to 15 m (4 to 50 ft)
Print
RIP Settings, 1 to 30 (media setting bank number)
1.5, 2.0, 2.5
Input thickness.
0.1 to 1.0 mm (4 to 40 mil)
Print
Print
Manual(Uni-D), Manual(Bi-D), Manaul(Dual Head)
Printable Side Out, Printable Side In
Periodically, Every Page, Off
0 to 40
Yes, No
Up to 22 half-size characters
1.5, 2.0, 2.5
Print
Auto, Manual
Standard (Auto), Standard (Manual), Block pattern
Pre-heater/platen heater: 30 °C to 50 °C (86 °F to 122 °F)
After heater: 30 °C to 55 °C (86 °F to 131 °F)
0 to 10 sec
Mode 1, Mode 2, Off
On, Off
Using the Control Panel Menu
*1
199