Only Seal Letters (Optional) - FP Mailing Solutions ultimail Operator's Manual

50 ultimail Operator Manual
7.5 Only seal letters
You can seal letters with the feeder or the sealer without metering them.
(optional)
SET UP
MODE SETTING
ONLY TRANSPORT, NO PRINTING
Switch on sealer
• Place the 'seal envelope' switch to the
seal
rear into position.
The envelopes must be suited for me-
chanical sealing (see page 184). Make
sure that the quality of the envelopes
used is a high one.
Setting "Only transporting" mode
• Open the SET UP menu with
• Select MODE SETTING
TRANSPORT, NO PRINTING.
The ultimail goes back to home menu.
The home menu does not show any
meter imprint settings now.
In the status line, you will see
MODE: ONLY TRANSPORTING.
• Position the letters, as usual, at the
sealer or feeder.
Press down moistened envelope flaps
To ensure that envelopes are well sealed,
we recommend pressing down the enve-
lope flaps firmly after metering.
key.
ONLY