Using The Ultimail As Incoming Mail Stamp - FP Mailing Solutions ultimail Operator's Manual

48 ultimail Operator Manual
Number of mail pieces
still to be metered
7.4

Using the ultimail as incoming mail stamp

For registering your incoming mail (up to a thickness of ¼"/6.35mm), you can use the
ultimail as incoming mail stamping machine. For this function, use the INCOMING
STAMP mode. The ultimail will print 'Received on: ...' together with the date
displayed. All users can use this function, even without access card.
SET UP
MODE SETTING
INCOMING STAMP
Selecting total pieces in the home
menu
You can also select total pieces directly in
the home menu. The pre-select counter
in the SET UP menu remains unchanged.
• Type the desired number.
The entered number appears at the
bottom right of the status line.
• Press key.
• Position the mail pieces as usual.
During metering, you will see the number
of mail pieces still to be metered in the
status line.
Setting incoming mail stamp function
• Call SET UP menu with
• Select MODE SETTING
INCOMING STAMP.
The ultimail sets the incoming mail stamp
and goes back to home menu. The home
menu only shows the date set and, if
required, the account (if an access card is
plugged in).
key.