Ultimail With Feeder - FP Mailing Solutions ultimail Operator's Manual

34 ultimail Operator Manual
5.4.3

ultimail with feeder

5.4.3.1 Positioning letters in stack
Caution! Observe the following notes for stack processing:
– Only position letters in stack which are to be printed with the same meter
imprint (postage, type of mail endorsement...).
– Position letters of the same format only (max. 14" x 10" / 353 x 250 mm).
– Only position letters of nearly the same thickness ( 0.04"/1 mm).
The ultimail processes letters of a thickness up to ¼" (6.35 mm).
– Observe the limits of stack heights.
Type / material of mail pieces
Letters
Postcards of a paper weight of at least
67 lb. (250 g/m
Postcards of a paper weight of less
than 67 lb. (250 g/m
Markings at the letter guide face at the feeder indicate stacking height limits for letters
Stack height
2
)
2
)
and postcards
+
–
Prepare letter stack
• Sort out any deliveries which are
unsuited for stack processing.
You feed such mail pieces individually
and manually (see page 36).
• Take about as many mail pieces as the
ultimail will be able to process in one
stack. Maximum stack height depends
upon the material.
Permissible stack height
2" (50 mm)
abt. 70 letters, contents: 1 sheet, non
folded
1.2" (30 mm), abt. 100 cards
0.6" (15 mm), abt. 80 cards
.