FP Mailing Solutions ultimail Operator's Manual page 129

Cleaning the print head
• Moisten a soft, fiberless cloth with
desalted water.
If you do not have desalted water at hand,
you can also use distilled or tap water.
Tap water contains minerals that can
leave deposits on the print heads though.
• Hold the cartridge as shown in the
figure. The nozzles face down!
• Wipe the print head slowly and very
softly with the cloth in the direction of
the arrow. Repeat this procedure
several times.
The water will blend with ink residues on
the print head and clean the nozzles.
• Reinsert the ink cartridge.
• Remove the other ink cartridge and
clean it in the same manner.
• Reinsert the ink cartridge.
• Close the cartridge flap.
For details on removing and inserting the
ink cartridges, refer to pages 122 to 125.
Maintenance and care 129