Positioning And Metering A Letter; Ultimail With Manual Positioner - FP Mailing Solutions ultimail Operator's Manual

5.4

Positioning and metering a letter

You can meter letters up to a thickness of ¼" (6.35 mm). For thicker deliveries you
should meter the empty envelope or use labels. Use envelopes made of ink-
absorbent material with as smooth a surface as possible. This gives the best printing
results.
How to position letters at the manual positioner and work with sealer or feeder, read
in Chapters 5.4.1 to 5.4.3.
You can select total pieces prior to metering. This ultimail function will help you
to have the metered deliveries readily stacked by numbers for the dispatch.
Read Chapter 7.3 on page 47.
5.4.1

ultimail with manual positioner

Letter guide face
When the display shows the home menu
and the ultimail is in METERING mode
(indication in the status line), you can
position and meter letters.
• Place the letter on the letter receiving
tray so that:
– the side to be printed is face up
(address window is visible)
– the upper edge is flush to the letter
guide face.
• Push the envelope in until the letter
sensor recognizes the envelope and
starts letter transport.
The ultimail feeds the envelope, prints,
and places the metered envelope in the
catch tray.
You can also start letter transport with the
key.
Metering 31