Redate - FP Mailing Solutions ultimail Operator's Manual

46 ultimail Operator Manual
7.2

Redate

If the meter imprint shows an incorrect date, you can print a correction with the correct
date on the non-address-side of the mail piece already metered.
SET UP
MODE SETTING
REDATE
Print redate
• Call SET UP menu with
• Select MODE SETTING
The ultimail sets the correction imprint
and goes back to home menu. The
REDATE mode is set.
• Enter new date.
• Confirm with the key next to the date
indication.
• Position the mail piece the
non-address-side face up.
The ultimail prints the redate imprint.
End mode "Redate"
• Press the key for about 3 seconds.
The ultimail goes back to METERING
mode.
key.
REDATE.