Cleaning The Print System - FP Mailing Solutions ultimail Operator's Manual

14.4

Cleaning the print system

You should start the cleaning process for the ink cartridges only if the quality of the
imprint is not good enough (e. g. gaps in the imprint after longer periods out of use).
INTENSIVELY CLEAN PRINT HEAD
SET UP
SYSTEM SETTINGS
PRINT
CLEAN PRINT HEAD
SET UP
SYSTEM SETTINGS
PRINT
Cleaning
• Call SET UP menu with
• Select SYSTEM SETTINGS
CLEAN PRINT HEAD.
A message will inform you about the
progress of the cleaning procedure.
Intensive cleaning
You should start the intensive cleaning
process if regular cleaning does not
improve print quality in a sufficient way.
• Call SET UP menu with
• Select SYSTEM SETTINGS
INTENSIVELY CLEAN PRINT
HEAD.
A message will inform you about the
progress of the cleaning procedure.
• Test the imprint quality by an ultimail
test print with postage value "0.00"
(see Chapter 4.3 on page 16).
When the cartridges are heavily stained it
may occur that even an intensive
cleaning process does not improve
imprint quality as expected. In such cases
you can clean the print heads
mechanically (see page 128).
Maintenance and care
key.
PRINT
key.
PRINT
127