FP Mailing Solutions ultimail Operator's Manual page 33

Positioning similar mail pieces
Especially when metering large quantities
of similar mail pieces, you can save time
by optimized letter feed.
• Arrange letters so that address areas
are face up.
• Loosen letter stack with the upper edge
on a level base and shake smooth.
• Scale up the letter stack so that the top
letter is the first protruding when
positioned.
• Hold the fanned out letter stack with
your left hand and place it on the letter
receiving tray as shown in the figure.
• Push with your right hand the top letter
in the direction of the arrow. Make sure
that the upper edge is flush to the letter
guide face.
• Once the letter is fed you can follow
with the next letter from the stack.
Press down moistened envelope flaps
To ensure that envelopes are well sealed,
we recommend pressing down the enve-
lope flaps firmly after metering.
• Stroke your hand firmly over the
envelope's / letter stack's flap area.
Metering 33