Adjust Moistening Level (Optional) - FP Mailing Solutions ultimail Operator's Manual

14.8 Adjust moistening level
There are two hoses of different length included in the scope of supply, to be mounted
on the cover of the water tank. The moistening level can thus be adapted to the letters
accordingly. Moistening can be reduced through the insertion of a hose-piece: the
longer the hose the weaker the moistening of the envelope flaps.
Without hose-piece
With hose-piece
(optional)
• Remove water tank out of the housing
(for further information see
Chapter 14.7 on page 133).
Normal moistening (without hose-piece)
Moistening is factory-set to achieve best
results in most cases.
Reduce moistening
• Plug the short hose-piece on the cover
of the water tank.
or
• Plug the long hose-piece on the cover
of the water tank for lesser moistening.
• Insert water tank into the housing with
the cover downward. Close the flap
(see page 139).
Maintenance and care 135