Trial Run - FP Mailing Solutions ultimail Operator's Manual

16 ultimail Operator Manual
4.3

Trial run

Letter guide face
You can also start letter transport with the
Position, in the same way, an empty envelope for trial run at the sealer or at
the feeder. For details how to handle sealer and feeder, read Chapter 5.
You can check the settings for metering
and the print quality by doing a trial run
with postage value "0.00" (zero imprint).
• Type the postage value "0" in the home
menu.
The digit "0" appears at the bottom right of
the status line.
• Confirm with the key for postage value.
(This is the multifunction key at the top
right - directly next to the postage value
display.)
Postage value is set to "0.00".
• Place an empty envelope on the letter
receiving tray.
– side to be printed face up
– the upper edge flush to the letter
guide face.
• Push the envelope in until the letter
sensor recognizes the envelope and
starts letter transport.
The ultimail feeds the envelope, prints,
and places the printed envelope in the
catch tray.
key.